Installed at a real home
GenerLink mounts behind the electric meter so your portable generator can stay outside where it is safer to operate during an outage.
Trusted dealer
Safe portable generator connection
Safely connect a portable generator to your home without rewiring.
GenerLink installs behind the meter, keeps the generator connection outside, and helps eliminate hazardous extension-cord setups during an outage.
Canadian-approved models30A + 40A options7-year warranty
Selector wizard
Match your GenerLink to the generator you already own.
Start with generator output, then choose the plug, cord length, and surge-protection option that fits your home and backup-power plan.
- Portable generators usually need between 4,400W and 9,600W running wattage to make sense for home outage use.
- 30A GenerLinks pair with generators up to roughly 7,200 running watts.
- 40A GenerLinks pair with generators up to roughly 9,600 running watts.
- Choose the plug type that matches the generator receptacle: L14-20, L14-30, or 14-50.
- The generator should have a circuit breaker and should be operated outdoors, protected from rain or snow as required by the manufacturer.
- GenerLink is designed for 200A or smaller meter sockets with 2S form factor compatibility.
How to choose the right generator
Match the connector to your generator first, then confirm running wattage and the cord length you need. As a rule of thumb, motors can require two to three times their running wattage to start.
Recommended setup
GenerLink 30A Non-Surge · L14-20 · 20 ft
$1,449.99
L14-20 plug · 20 ft cord · up to 7,200W
SKU
MA23-N 20ft L14-20
Generator capacity
Up to 7,200W
Plug style
L14-20
Cord length
20 ft
Estimated shipping: Purolator Ground · $82.00
Typical delivery: 2–5 business days across most Canadian destinations
Why homeowners choose GenerLink
Installed at the meter. Ready when the power goes out.
GenerLink automatically disconnects from the utility grid when the generator is running, helping prevent dangerous back feed while letting you power selected household circuits from the main panel.
Power the circuits that matter most
The system is designed to work with 200 amp or smaller residential services and gives you the flexibility to turn on the circuits you need from your existing breaker panel.
See it in action
Watch how GenerLink works before you order.
This walkthrough gives homeowners a quick look at how GenerLink connects at the meter, how it pairs with a portable generator, and why it is a cleaner backup-power setup than running extension cords throughout the house.
Homeowner-friendly overviewPortable generator connection demoHelpful before purchase or installation planning
Product catalog
Choose the configuration that fits your generator.
Choose between 30A and 40A models, surge or non-surge protection, and the connector that matches your generator: L14-20, L14-30, or 14-50.
From $1,449.99
30A Non-Surge
A straightforward transfer-switch setup for compatible 30A generators up to 7,200 running watts.
- For generators up to 7,200W continuous
- Available in L14-20 and L14-30 plug options
- 20, 40, and 60 foot cord lengths
L14-20 · 20 ft$1,449.99
L14-20 · 40 ft$1,749.99
L14-20 · 60 ft$1,949.99
From $1,609.99
30A Surge
Adds built-in surge protection for homes without a whole-home surge solution already in place.
- Built-in surge protection with audible alarm
- Ideal if the panel does not already have whole-home surge protection
- Same 30A generator compatibility as the non-surge model
L14-20 · 20 ft$1,609.99
L14-20 · 40 ft$1,899.99
L14-20 · 60 ft$2,089.99
From $1,809.99
40A Non-Surge
For larger compatible generators up to 9,600 running watts, available with L14-30 or 14-50 plug styles.
- For generators up to 9,600W continuous
- Available in L14-30 and 14-50 plug options
- 40A setups are recommended at 60 feet or less
L14-30 · 20 ft$1,809.99
L14-30 · 40 ft$2,089.99
L14-30 · 60 ft$2,289.99
From $1,949.99
40A Surge
The premium 40A option with built-in surge protection for higher-capacity generator setups.
- Built-in surge protection
- Supports larger home backup loads up to generator capacity
- Available with L14-30 and 14-50 plug styles
L14-30 · 20 ft$1,949.99
L14-30 · 40 ft$2,249.99
L14-30 · 60 ft$2,449.99
Need a longer run? GenerLok cords are stocked in 20, 40, and 60 foot lengths, with 80 and 100 foot cords available on request.
Compatibility guidance
Meter and generator fit notes
Not approved for installation in BC, QC, NT, or NU.
Standard stocked cord lengths are 20, 40, and 60 feet. Longer 80 and 100 foot cords can be arranged as special-order accessories.
GenerLink is designed for standard household electric services of 200 amps or less with 2S meter compatibility.
- ⚡Turn off the home circuit breakers before connecting generator power.
- ⚙️Position the generator safely outdoors and connect the GenerLok cord to the matching generator outlet.
- 🔌Plug the GenerLok cord into the GenerLink receptacle until it locks in place.
- ▶️Start the generator using the manufacturer’s instructions, then energize home circuits one at a time starting with larger motor loads.
- ✅When utility power returns, shut down the generator, wait for the transfer back to utility power, and then disconnect the cord.
Delivery info
Fast shipping across Canada
Orders ship with Purolator Ground. Most standard GenerLink orders arrive within 2–5 business days across most Canadian destinations, depending on destination.
Estimated delivery time
2–5 business days
Typical transit time for stocked units shipping to most Canadian destinations.
Approximate shipping cost
$82–$120 for most standard GenerLink orders
Final cost depends on model, cord length, and destination. Remote locations or oversize/special-order accessories can cost more.
Shipping is calculated from the unit, cord length, and destination entered at checkout so you can review delivery costs before payment.
FAQ
Common questions before you order
Review the key compatibility, installation, and product questions that come up most often when choosing a GenerLink system.
Why should I choose surge protection?
Surge protection is recommended unless the home already has a whole-home surge device on the main electrical panel. The surge module includes an audible alarm so you know if it has taken a hit.
What sizes do the GenerLinks come in?
GenerLink units are available in 30A and 40A configurations. There is no 50A GenerLink unit; customers with a 50A-style generator outlet are typically matched to the 40A model with a 14-50 plug.
What plug style will I need?
Match the GenerLink plug to the generator output receptacle. Common options are L14-20, L14-30, and 14-50. If the generator does not have one of those outputs, compatibility should be confirmed before ordering.
What cord lengths are available?
Standard stocked lengths are 20, 40, and 60 feet. 80 and 100 foot cords can be handled as special-order accessories. 40A setups are typically recommended only up to 60 feet.
How will I know utility power has been restored?
The GenerLink status lights indicate when utility power has returned. When utility power is restored, the green utility light is illuminated.
Can I use GenerLink in all Canadian provinces?
GenerLink is approved in much of Canada, but not in BC, QC, NT, or NU at this time.
Who can install a GenerLink?
A licensed electrician is typically required. Local utility requirements should always be confirmed before installation.
How is GenerLink different from a traditional transfer switch?
GenerLink installs at the meter, is much faster to install, and lets the homeowner choose circuits directly from the existing breaker panel instead of being limited to a small set of prewired circuits.